Custom Reports

INTRODUCTION


Custom Reports enables you to aggregate data within Validere by leveraging the attributes on your Facilities, Equipment and Flows. There are two types of custom reports: Volumetric Custom Report and Emissions Custom Report

Volumetric Custom Report

The volumetric custom report enables you to aggregate flow volume records based on Facility, Equipment, or Flow attributes to produce different reports based on the analysis you wish to conduct. Flow volume records can be a result of fuel meter volume measurements from devices, manual form submissions, or theoretical estimates through estimation methods. The custom report allows you to aggregate all that data for your chosen use case. For example, Fuel, Flare or Vent volumes from each equipment; total Fuel, Flare, or Vent volumes per Facility. Your only limitation is the attributes that live on your Assets. 

Emissions Custom Report

Like the volumetric custom report, the emissions custom report enables you to aggregate emissions results from estimation methods on equipment to produce different reports based on the analysis you wish to conduct.

Opening a Saved Custom Report

  1. navigate to the Custom Reports page under the Reports tab in the Navigation bar. 
  2. You have two options for Company Report and My Reports
    1. Company Reports are reports that can be accessed by all users
    2. My Reports are reports that only you can access.
  3. Click on the Name of the report to open the report contents

Build a Custom Report

The Validere platform allows you to easily select data fields and outputs needed for your analysis and/or reporting - the more columns you add, the more granular the data becomes.

  1. To build a custom report, navigate to the Custom Reports page under the Reports tab in the Navigation bar. 
  2. Select either the Emissions or Volume tab and click Create Report

  1. Build the custom report by modifying the configuation panel
    1. Rows: will determine what columns are shown in the report. Note: the ordering you select the columns will dictate the order of the columns
    2. Outputs will determine what measurement types are included in the custom report
    3. Date Rage: will filter the measurement types based on the chosen date range
    4. Reporting Scenario: to filter the measurement types based on the assigned reporting scenario